Stasis

So the proper offset hats are in production but x months out.. Instead of waiting I had a couple of .060" spacers laser cut that sit behind the hats spacing the entire hat/rotor out.





Jared@Stasis swapped out the 28mm rotors for 32mm rotors free of charge.

The main issue all along has been a miss-communication about the calipers. The mono6 I'm using has a 38mm centerline to radial mount whereas the mono4 is available in 36mm or 38mm. Initial conversations with Stasis indicated they were using the 38mm. Turns out they use the 36mm. So I'm still .0787" offset. That's fixed by milling .040" off of the caliper bracket. Swapping out the .060" hat/rotor spacers for .020".





328mm 4 piston Brembo GT



6 piston Alcon/Stasis